Description
RIB Clean & Shine is a cleaner which removes dirt, grime, scuff marks and oxidation stains. The product is safe for use on all rubber and vinyl surfaces. It leaves a protective layer and also protects against UV. RIB Clean & Shine also gives a smoothening and water resistant effect to the surface. * Easy to use * Does not damage rubber or vinyl surfaces * Removes dirt, grime, scuff marks and oxidation * Leaves a protective UV and water-resistant finish PRODUCT INFORMATION Colour YMA658 Specific Gravity 0.85 Typical Shelf Life 5 yrs Unit Size 500 ml APPLICATION AND USE Preparation Clean with Boat Soap or RIB Rub & Scrub if necessary. Rinse with fresh water and allow to dry. Method The surface does not need to be completely dry before commencing application of RIB Clean & Shine. Apply RIB Clean & Shine on the surface and work in with a dry cloth (micro fibre cloth is recommended). Allow to dry. Repeat if necessary. Hints Mixing Shake well before use. Some Important Points Product temperature should be minimum 5°C/40°F and maximum 30°C/86°F. Ambient temperature should be minimum 5°C/40°F and maximum 30°C/86°F. Substrate temperature should be minimum 5°C/40°F and maximum 30°C/86°F. Compatibility/Substrates Suitable for use on rubber surfaces. Not sensitive to frost. Recommended DFT Application Methods Cloth or sponge. TRANSPORTATION,STORAGE AND SAFETY INFORMATION Storage GENERAL INFORMATION: Exposure to air and extremes of temperature should be avoided. For the full shelf life of this product to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/40°F and 35°C/95°F. Keep out of direct sunlight. TRANSPORTATION: RIB Clean & Shine should be kept in securely closed containers during transport and storage. Safety GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line. DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal. Remainders of this product cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.